S helical 5.8ghz

this is a 5.8ghz antenna for the rg402 coax similar to a helical antenna.

this should be printed in either ABS or PETG because you'll solder the copper lobes attached to the printed jig.

the coaxial cabel will slip directly to the jig and solderd on.
i added the top face to shape the wire before adding the wire to the body

you will need :
-rg402 coaxial cable to be at full λ that`s = 50.7mm that is with center pin connected.
.center conductor should be 3mm

-four 0.6mm copper