Convertion frame from QX90 to diy 2s tiny whoop

This is for converting a QX90 to a 2s tinywhoop style quad. The props needs to be cut down to size, using a compass and a nail clipper is what I found to be the easiest way to do that. The solder bead on the fc needs to be moved from "1s" to "2s". The camera needs to run off of just one cell. What I did is that I took a 2s balance plug and soldered the outermost pins directly to the board and the middle pin to the positive of the camera. The cameras negative cable can be soldered to ground where