Thingiverse
just another fan holder for pla davinci pro 1.0
by hilleke
26
Downloads
11
Likes
0
Makes
just another fan holder for the davinci pro 1.0.
You do not need additional screws to fix the holder. It fits on the existing screws of the printhead.
I use a Titan TFD-B6015M12B fan.
https://www.nbm24.de/baumarkt/de/shop/Elektronik/Elektronik-Kategorie/Kuehlung-Lueftung/Gehaeuse-Luefter/?card=120238
You have to cut one screwhole of the fan. I used a Dremel. It is only fixed with two screws. The holes for the screws in the holder are 3mm. You can adjust the scad-file for other srews.
You do not need additional screws to fix the holder. It fits on the existing screws of the printhead.
I use a Titan TFD-B6015M12B fan.
https://www.nbm24.de/baumarkt/de/shop/Elektronik/Elektronik-Kategorie/Kuehlung-Lueftung/Gehaeuse-Luefter/?card=120238
You have to cut one screwhole of the fan. I used a Dremel. It is only fixed with two screws. The holes for the screws in the holder are 3mm. You can adjust the scad-file for other srews.
Sign in to leave a comment
Sign in