Thingiverse
YinYang Fidget Spinner (Thomas Sanladerer Inspired)
by LetsPrintIt
102
Downloads
101
Likes
0
Makes
Yin and Yang Fidget Spinner (Thomas Sanladerer Inspired)
Materials Needed:
1 608ZZ Skateboard Ball Bearing (not included in Download ;P)
Print the STL twice in any color
Important Note:
You MUST print the STL at a min. of 20% infill so it can have enough weight to keep spinning. After you print both halves, they need to be twist locked together (no glue required) before pressing the bearing into the center of the design. The entire design is held together by pressure. Keep in mind that
Materials Needed:
1 608ZZ Skateboard Ball Bearing (not included in Download ;P)
Print the STL twice in any color
Important Note:
You MUST print the STL at a min. of 20% infill so it can have enough weight to keep spinning. After you print both halves, they need to be twist locked together (no glue required) before pressing the bearing into the center of the design. The entire design is held together by pressure. Keep in mind that
Sign in to leave a comment
Sign in