Thingiverse
Lasercut GT2 belt coupler
by JackCarter
16
Downloads
19
Likes
0
Makes
Here is a lasercut coupler for a 6mm GT2 belt.
I made this with 3 and 6 mm MDF (the left part with 3mm, the other partswith 6).
Use two 25mm (at least, i used 40mm on the photo) M3 screw to press the belt.
I made this with 3 and 6 mm MDF (the left part with 3mm, the other partswith 6).
Use two 25mm (at least, i used 40mm on the photo) M3 screw to press the belt.
Sign in to leave a comment
Sign in