Thingiverse
WanHao Duplicator I3 2.1 and Plus Belt Tensioner
by AlexWYYC
313
Downloads
126
Likes
3
Makes
To install this on a DI3 PLUS you must disassemble your extruder and rotate the stepper motor so that the plug faces the print bed. See pictures for orientation of plug.
^ That part isn't hard. Something like 3 screws to take off and 5 minutes worth of rejiggering.
Modified this belt tensioner to work on the DI3 Plus.
The belts do not rub or cause issues at either extreme.
Installation:
To attach the body you'll need two M4 x 12mm screws and two M4 flat washers.
You have t
^ That part isn't hard. Something like 3 screws to take off and 5 minutes worth of rejiggering.
Modified this belt tensioner to work on the DI3 Plus.
The belts do not rub or cause issues at either extreme.
Installation:
To attach the body you'll need two M4 x 12mm screws and two M4 flat washers.
You have t
Sign in to leave a comment
Sign in