Thingiverse
Simple Fidget Hand Spinner
by RustyBacon
26
Downloads
16
Likes
0
Makes
A very simple design.
Three bearing spinners don'T get much shorter than this.
Use any standard 608 (skate) bearings.
I recommend you insert the bearings right after the print as ended and the model is still soft on the heated bed. They will go in easily and after the print is cooled down, they wont go anywhere. Also, no sanding will be required.
If you don't insert the bearings when the print is still soft, depending on your printer, you might need little to no sanding to fit the beari
Three bearing spinners don'T get much shorter than this.
Use any standard 608 (skate) bearings.
I recommend you insert the bearings right after the print as ended and the model is still soft on the heated bed. They will go in easily and after the print is cooled down, they wont go anywhere. Also, no sanding will be required.
If you don't insert the bearings when the print is still soft, depending on your printer, you might need little to no sanding to fit the beari
Sign in to leave a comment
Sign in