Raspberry Pi Zero Flex Camera Case

This case was designed to hold a Raspberry Pi Zero W and a Raspberry Pi camera v2. This is a perfect setup to run OctoPi 3D printer software and utilize the Pi camera for time-lapses. It could also be used as a web cam unit.

The mounting system was created to accommodate custom designed mounts for any application. The mounting holes are 19.5mm on center.

**You'll need the following hardware:**
- (**4**) M3 x 10mm screws
- (**2**) M3 x 6mm screws
- [Raspberry Pi Zero W](https://www.ada