Thingiverse
E3D V6 Silicone Booth Mold
by neo777
30
Downloads
22
Likes
0
Makes
Silicone mold for E3D V6 hotend's
The holes are for string to aid in the separating of this reusable mold.
The mold part needs a 1.6mm rod inserted in the top hole for the nozzle
Used high temp RTV Silicone that is good for up to 316C continuous temperature
The first mold attempt was a failure as the silicone did not fully cure in 24 hours
but the parts that cured are perfect
next will try 72 hours cure time
Update 2017/03/28 Changed orientation of housing to print orientation. Added
The holes are for string to aid in the separating of this reusable mold.
The mold part needs a 1.6mm rod inserted in the top hole for the nozzle
Used high temp RTV Silicone that is good for up to 316C continuous temperature
The first mold attempt was a failure as the silicone did not fully cure in 24 hours
but the parts that cured are perfect
next will try 72 hours cure time
Update 2017/03/28 Changed orientation of housing to print orientation. Added
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in