Thingiverse
Detatchable packraft skeg
by gimle
172
Downloads
121
Likes
1
Makes
Detatchable skeg for alpacka packraft, based on fcsfin. Serveral sizes included.
I found the 13cm version to work best with my Llama, and it really does wonders for directional stability.
Recommended 1mm layer height, 90% infill and 5 wall thickness (0.4mm nozzle), and depending of the printer maybe some over extrusion. The fin should be a bit oversize after printing and sanded to a very tight fit in the slot at the base plate.
Can be glued but I attached the base plate to the packraft wit
I found the 13cm version to work best with my Llama, and it really does wonders for directional stability.
Recommended 1mm layer height, 90% infill and 5 wall thickness (0.4mm nozzle), and depending of the printer maybe some over extrusion. The fin should be a bit oversize after printing and sanded to a very tight fit in the slot at the base plate.
Can be glued but I attached the base plate to the packraft wit
Sign in to leave a comment
Sign in