Thingiverse
Mini Drak Nose Camera Mount
by billyd
65
Downloads
49
Likes
0
Makes
This version splits the mount into a base and cover. The base is glued with goop to the mini drak after cutting off the nose. The cover screws to the base with 3x m2.5 screws (about 10-12mm long is plenty. The hex nuts are captured in the base and should be glued in place to they don't slide away from the hole. I use nylon screws and nuts to minimize weight. Rev B moves the location of the split closer to the rear of the aircraft allowing both cameras to be removed through the front when the cov
Sign in to leave a comment
Sign in