Thingiverse
UltiBots + E3D Titan Aero (magball version)
by AE9RB
79
Downloads
37
Likes
3
Makes
This mounts an E3D Titan Aero to an Ultibots D300VS. It may also work on a K250VS with a small stepper motor.
The spacer is for small steppers with short shafts which don't allow use of the E3D spacer. Jam it into the heatsink hole. If printing with ABS, you will need to go slow and turn on the parts cooling fan.
The fan mount requites two M3x25 screws and nuts. The magball arms can interfere with the sensors in some fans. If your fan won't start spinning just turn the offending arm around
The spacer is for small steppers with short shafts which don't allow use of the E3D spacer. Jam it into the heatsink hole. If printing with ABS, you will need to go slow and turn on the parts cooling fan.
The fan mount requites two M3x25 screws and nuts. The magball arms can interfere with the sensors in some fans. If your fan won't start spinning just turn the offending arm around
Sign in to leave a comment
Sign in