Bladefuse holder with flying leads

This is a fuseholder for standard automotive blade fuses (19,1x5,1x18,8 mm).
It consists of two parts that are mounted using 3 self tapping screws.
two 6,3 mm blade receptacles are used to contact the fuse.


What else is need:
Wire (make sure the cross sections suites the fuse amperage)
6,3 blade receptacles non isolated
Screws: 2,9x9,5 mm self tapping countersink
Crimping tool

rework after printing:
countersinks had to be enlarged.

Further work:
design an attached lid.
d