Thingiverse
Spool holder/adapter for 8mm smooth rod or M8 threaded rod
7
Downloads
3
Likes
0
Makes
A spool adapter for my prusa i3 wooden frame. Printed mine in PLA with 20% infill and .2 layer height.
The diameter of the inside of my spool is 39mm and the part does have a flange for both the bearing and the spool. The two bearings used are 608ZZ ones.
Since i did not want the bearing to come loose the hole is snug, I actually had to stand on the part to get the bearing in.
Print time for my printer was about 20 minutes, and mine is not very fast.
The diameter of the inside of my spool is 39mm and the part does have a flange for both the bearing and the spool. The two bearings used are 608ZZ ones.
Since i did not want the bearing to come loose the hole is snug, I actually had to stand on the part to get the bearing in.
Print time for my printer was about 20 minutes, and mine is not very fast.
![{[Fast Print]} Fillament Spool Holder with 608zz and M8 rod](https://wsrv.nl/?url=https%3A%2F%2Fcdn.thingiverse.com%2Frenders%2F92%2F20%2F9d%2F0b%2F65%2Fspoolholder_2_display_large.jpg&w=400&h=300&fit=cover&output=webp&q=80)
Sign in to leave a comment
Sign in