Thingiverse
Pro trinket box (small)
by jimlee
26
Downloads
13
Likes
0
Makes
A printable box to fit an Adafruit Pro Trinket processor. (Smaller than original)
The processor & charging setup are mounted to the bottom of the box by a couple 2mm socket cap screws. Bosses for these are printed in the bottom of the box.
There is still room to fit a 150mah lipo battery and more left over for some sensors & wiring.
The processor : https://www.adafruit.com/product/2000
The charger : https://www.adafruit.com/product/2124
The switch : https://www.adafruit.com/pr
The processor & charging setup are mounted to the bottom of the box by a couple 2mm socket cap screws. Bosses for these are printed in the bottom of the box.
There is still room to fit a 150mah lipo battery and more left over for some sensors & wiring.
The processor : https://www.adafruit.com/product/2000
The charger : https://www.adafruit.com/product/2124
The switch : https://www.adafruit.com/pr
Sign in to leave a comment
Sign in