Thingiverse
Adjustable RepRap Full Graphic LCD Mount Ultimaker
2
Downloads
4
Likes
0
Makes
Particularly usefull if you have your printer on a higher shelf. This way you can point the LCD screen facing downwards. In my case the printer is on a shelf above my desk.
I used hot glue to mount the bracket to the ultimaker. This way you can later remove the bracket without leaving a drilled hole in the front.
You will need:
4× 3mm screws (length depending on the thickness of your LCD cover/case)
1× 4×16mm screw
4× M3 Nuts
1× M4 Nut
I used hot glue to mount the bracket to the ultimaker. This way you can later remove the bracket without leaving a drilled hole in the front.
You will need:
4× 3mm screws (length depending on the thickness of your LCD cover/case)
1× 4×16mm screw
4× M3 Nuts
1× M4 Nut
Sign in to leave a comment
Sign in