Customizable Eggloft Egg Rocket Nose Cone

Fabricate "Side-A" and "Side-B". Also make the "Snap" piece which you can friction fit or glue into the slot on the Side-B shell. Adjust the depth of this piece so that when Side-A is mated to Side-B it is held snug.

Press fit and glue 4 small pins into the alignment holes on the Side-B shell. I used 4d finish nails cut down to size.

The included STL files here are for fitting into a BT-20 tube. After fitting, tape may be used to affix the casing by wrapping the shoulder and the tube. To u