Thingiverse
LED Balloon Insert
by ShuttleSpace
12
Downloads
10
Likes
0
Makes
An insert to put a DIP type LED inside a balloon and allow it to be filled and tied off easily.
Has recess in the bottom for a 2X10MM magnet.
This works with the throwie kit that we sell at LilyLEDs
http://www.lilyleds.com/Products/113/LED-Throwies
The grooves are for tie-off's or elastics.
It will need a plug for inside the bottom or could put some thin tape or something over the magnet before inserting it to give a good seal.
Could also be used as a thrust or propellant device for ba
Has recess in the bottom for a 2X10MM magnet.
This works with the throwie kit that we sell at LilyLEDs
http://www.lilyleds.com/Products/113/LED-Throwies
The grooves are for tie-off's or elastics.
It will need a plug for inside the bottom or could put some thin tape or something over the magnet before inserting it to give a good seal.
Could also be used as a thrust or propellant device for ba
Sign in to leave a comment
Sign in