Geeetech Rostock 301 fan - depreciated

____
Depreciated in favor of https://www.thingiverse.com/thing:2684486

The fan can hit the veritcal pillars :(
Still execute the removal of the alu piece
And have a look at https://www.thingiverse.com/groups/geeetech-rostock-301/forums/general/topic:26474
____

ORIG text below:
My version of a cooling fan + LEDring combination for my Geeetech Rostock 301.

IMPORTANT NOTE: REMOVE the alu piece between your nozzle and the cooling fan!
This will
1. CLAMP your hotend much better
2. bring your hotend a bit more down.
If you don't, you run the risk that my cooler will not be 1mm away from your workpiece at all.

Ha, and of course: the fan that you can use is one of the three that you have in spare of the 3 extruder motors on top of your Rostock 301 ;)!

June 30: I wanted to update the fan to have a bit more airflow (see separate stl) and I just found out a major disadvantage of this fan :'( --> it limits the movement of the head! the rods bump into the top corners of the