Small Happy Face Fidget Spinner

Small Fidget Spinner for My Daughter with DS. Her fingers are short so I made this smaller for her.

The center hole is 21.97mm to use a 22mm bearing. I used a 602 8x22x7mm. Fits tight I used a mallet and a dowel rod to place it. Could have used a vice also.

I also uses buttons I will add later to cap the center of the bearing. (Makes it easier to spin.)

The Fidget button may require a bit of filing sanding to get a smooth finish and fit. Just work with it. I use Bones Reds Precision S