Thingiverse
Hictop IEC Socket PSU Cover
by mr_fibuli
16
Downloads
7
Likes
0
Makes
A PSU cover designed to fit my Hictop 3DP-17 24v PSU - but will probably fit many other printers with similar PSUs.
The design takes a combined IEC mains socket and switch unit (widely available on ebay).
The cutouts behind the socket hole are designed to take the tabs on the socket, which on the one I bought were designed to fit onto a 1.2mm thick plate.
I used M3 x 5 screws to attach to the PSU.
The design takes a combined IEC mains socket and switch unit (widely available on ebay).
The cutouts behind the socket hole are designed to take the tabs on the socket, which on the one I bought were designed to fit onto a 1.2mm thick plate.
I used M3 x 5 screws to attach to the PSU.
Sign in to leave a comment
Sign in