Thingiverse
Bottle cage braze-on DISPLACER
by tongo
61
Downloads
30
Likes
0
Makes
Youtube video!
Video Link
From now on you won’t have problems with bottle cage being too low or too high. Or bottle being jammed inside two tubes with sharp angle.
You only need to download the file, print it and supply it by 2 sets of 2 screws plus two nuts. And in result you get up to 55 mm of displacement. I provided 3 different sizes for 3 different diameters of your frame’s tubes. 28.6 mm, 31.8 mm and 34.9 mm.
What you will need in detail:
1. Printed displacer body.
Video Link
From now on you won’t have problems with bottle cage being too low or too high. Or bottle being jammed inside two tubes with sharp angle.
You only need to download the file, print it and supply it by 2 sets of 2 screws plus two nuts. And in result you get up to 55 mm of displacement. I provided 3 different sizes for 3 different diameters of your frame’s tubes. 28.6 mm, 31.8 mm and 34.9 mm.
What you will need in detail:
1. Printed displacer body.
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in