Thingiverse
BLTouch calibration tool
por WalterSKW
214
Descargas
102
Likes
0
Makes
A simple BLTouch calibration tool.
It is designed to be 8,3mm high as this is the distance specified in the spec sheet.
**Printing**
The spec gives 8,3mm +/- 0,2mm : should be printed accordingly. Layer height must be chosen carefully.
I have a 1,8° Z stepper driving a 8mm/revolution threaded rod with 200 steps for 1mm.
Good layer heights for this config are (sweet spots at full steps) :
0,08, 0,16 and 0,32 giving -0,02mm difference with the desired height.
If you don't know this for your
It is designed to be 8,3mm high as this is the distance specified in the spec sheet.
**Printing**
The spec gives 8,3mm +/- 0,2mm : should be printed accordingly. Layer height must be chosen carefully.
I have a 1,8° Z stepper driving a 8mm/revolution threaded rod with 200 steps for 1mm.
Good layer heights for this config are (sweet spots at full steps) :
0,08, 0,16 and 0,32 giving -0,02mm difference with the desired height.
If you don't know this for your
Inicia sesión para dejar un comentario
Iniciar sesión