Extruded Frame Spool Holder

Here is my Spool holder for my Tevo Tarantula. Printed in eSun PLA+ Cold White

You will need:
1 Bearing 8X22X7
4 T-Nuts
4 M4 10mm bolts

You will need to print at least 2 LockingNut.stl, but i printed 3, the third locks the SpoolBolt.stl in place.

The threads turn well, but it they're too stiff some WD40 or Bike Grease will help them turn easier. It is a good idea to print the LockingNut.stl and SpoolBolt.stl at 102% though, just to give the thread that extra tiny bit of room.

Depe