Thingiverse
Radial Fan Ring Duct TEVO Black Widow
by 1st_snow
84
Downloads
65
Likes
2
Makes
fan duct for a radial fan to mount under the X-beam of the black widow to keep a free view on the nozzle.
tested with the stock extruder (01-2017) with the heater cartridge cables going sideways to the right.
designed for a 15,3 x 19,5mm fan opening (outside measurements)
required materials:
- 4x20 Bolts (flat head prefered) + Nuts (2x)
- 5x10 (or 5x15, 5x20,...) + Nut (1x)
I would suggest to print a second one straight away while the first one is used to cool it so you can s
tested with the stock extruder (01-2017) with the heater cartridge cables going sideways to the right.
designed for a 15,3 x 19,5mm fan opening (outside measurements)
required materials:
- 4x20 Bolts (flat head prefered) + Nuts (2x)
- 5x10 (or 5x15, 5x20,...) + Nut (1x)
I would suggest to print a second one straight away while the first one is used to cool it so you can s
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in