22lr Compensator 1/2-28 threaded

Couple designs I made for compensators for my Taurus TX22 Standard/Competition. Should fit any 22lr/airsoft with similar threading but not sure if timing will

Quad port has 4 circular ports at 45 degrees, similar the Tandemkross compensator.

Single 45 degree one has one single large 45 degree port, similar to the Lakeline.

Print in PLA+ or Pro, 99.9% infill, 4 walls. Needs supports, tree supports work good.

Square Minimalist has mini ports at 90 and 270 degrees with a large port up top.

Single minimalist has a single large port at 360 degrees, flared at the bottom to let expanding gasses start a horizontal movement before being pushed up.

Circular Minimalist is a standard pistol type compensator, a single 180 degree port.

This can can be printed upside down with no supports as long as your printer can bridge well.

Threaded in 1/2-28, it has 10mm of threading before the ports start, grabbing gasses as soon as they exit the barrel.

Start installation at