Thingiverse
Chinese E3D clone fan with integrated layer fan for Prusa Sunhokey
by Choro
32
Downloads
29
Likes
2
Makes
Integrated fan with Prusa Sunhokey.
Important things:
1. The Hotend is chines clone so they have another dimension, I made it to size 24,8 mm
2. A few importet dimension you can see on picture,
3. Fan for cooling Hotend is 40mm,
4. Fan for cooling print is a 5015S 12V Blower,
5. To assembly require are 9 M3 screws of different lengths:
2 x M3 x 16mm
2 x M3 x 10mm
2 x M3 x 25mm
1 x M3 x 20mm
2 x M3 x 12mm and
7 x M3 nuts
(two screws without nuts are mounted to the 2.8 holes seen in
Important things:
1. The Hotend is chines clone so they have another dimension, I made it to size 24,8 mm
2. A few importet dimension you can see on picture,
3. Fan for cooling Hotend is 40mm,
4. Fan for cooling print is a 5015S 12V Blower,
5. To assembly require are 9 M3 screws of different lengths:
2 x M3 x 16mm
2 x M3 x 10mm
2 x M3 x 25mm
1 x M3 x 20mm
2 x M3 x 12mm and
7 x M3 nuts
(two screws without nuts are mounted to the 2.8 holes seen in
Sign in to leave a comment
Sign in