Z stop for Geeetec PRO C

OK the Z stop is pretty poor and uses a 3 mm bolt my nut broke so i made this one that clamps to the bearing housing , i also change my throat to 40 mm which the original end stop couldn't get to .
you need 3x m3 x 12 mm cap-screws and 3 x 3 mm nuts ,also a 5 mm cap screw preferable set screw used PLA at 30% .2 layer but it doesn't matter
depending on how long you need it to be you may have to remove original nut metal over hang ,can add a spring but its pretty tight .