LED Bracket/Holder

I cannot get Simplify3D to not print the top of the cone (so light can shine thru) so I had some prints where I just drilled the hole out and some I stopped the printing short to get the opening.

I started out whit Micro Center LED strip:

http://www.microcenter.com/product/391704/Blue_5_LED_Lazer_Light

and remove the board from the casing. I cut it down to keep only 1 LED and 1 resistor.

I used, for now, the provided velcro to attach this thing to the extruder.

For power, since t