Thingiverse
Prop Guard for MHQ2 Quadcopter
by markag
7
Downloads
7
Likes
0
Makes
Prop guard for MHQ2 Quadcopter. Print with support to build plate. I printed mine with 40% fill and 3 perimeters.
I suggest printing these in PETG, ABS, Nylon or other filament with good layer bonding that won't be brittle. These guards are pretty fragile with PLA and are prone to snapping and braking at layer lines during an impact.
I may do a revision 2 of this at some point, but fit-up was good with 5" props on my MHQ2 utilizing 2204 2300KV motors.
===================================
I suggest printing these in PETG, ABS, Nylon or other filament with good layer bonding that won't be brittle. These guards are pretty fragile with PLA and are prone to snapping and braking at layer lines during an impact.
I may do a revision 2 of this at some point, but fit-up was good with 5" props on my MHQ2 utilizing 2204 2300KV motors.
===================================
Sign in to leave a comment
Sign in