TEVO Little Monster - Enclosure

Here's my enclosure kit for TEVO Little Monster

You need 2.5mm-thick-polycarbolate panels (such as plexyglass) in which you must cut :

6 x (1000 x 66mm)
2 x (1000 x 159mm)
2 x (1000 x 319mm)

Note : You can also use from 2.4 to 2.6mm thick panels

You need to print :
- min 6 x Integrator4door
- min 6 x Hinge
- min 12 x Integrator
- min 12 x Corners

I've added gauges to help you drilling holes at the correct position.

#### Hardware needed (per printed piece) :