Shisha/Hookah (configurable)

Simple 3d printed hookah, you will need:

- 3d printer
- PLA fillament and ideally flex fillament if you want better sealing
- hose (default values fits hose of 1cm diameter or you can use hose of some original shisha)
- pot as this is only piece that you cannot print (PLA and any other plastic would melt)

If you want to customize, download shisha.scad.
Otherwise get following parts:

- shisha_body.stl
- shisha_tube.stl (this one needs supports :-/)
- shisha_hose_end.stl (not needed