Kossel Clear Stiffener Brackets and Feet

Edit: Added angled brackets as well as feet.

video of them installed: http://www.youtube.com/watch?v=wBTLpYWn8cA


These brackets need:

6x 742mm long, 1/4" rod
36x M3 nuts
36x M3 x 25 socket cap screws
36x M3 x 10 socket cap screws
36x M3 washers

The main reason for these is to guard the soft aluminum track and belts. They have the added benefit of adding a little rigidity to the printer.

The nuts go on the inside, you have to tighten the set screw all the wa