Thingiverse
NEMA17 stepper motor damper - different thicknesses
by jahknee
127
Downloads
69
Likes
1
Makes
Vibration dampers for NEMA17 stepper motors
===================================
Install these between your X and Y stepper motors and the motor brackets to reduce noise and vibrations.
There are other dampers on Thingiverse, but none, that I could see, with various thicknesses. Here you'll get with the following thicknesses:
* 0.8mm
* 1.2mm
* 1.6mm
* 2.0mm
* 2.4mm
Use the one that provides best noise reduction with no, or little, degradation in print quality.
===================================
Install these between your X and Y stepper motors and the motor brackets to reduce noise and vibrations.
There are other dampers on Thingiverse, but none, that I could see, with various thicknesses. Here you'll get with the following thicknesses:
* 0.8mm
* 1.2mm
* 1.6mm
* 2.0mm
* 2.4mm
Use the one that provides best noise reduction with no, or little, degradation in print quality.
Sign in to leave a comment
Sign in