Prusa i3 'Rework' EZStruder Mount

This mount allows you to mount an EZStruder direct drive extruder to your Prusa i3 'Rework' X-Carriage.

I chose to use a direct drive extruder as I was having some issues managing the retraction settings with the Wades style geared extruder leading to excessive stringing.

(Disclaimer; I also changed the filament diameter from 3 to 1.75 and the hotend nozzle from 0.5 to 0.3mm, so the extruder may not have been the only contributor to my problem)