Extruder Motor Mount with cablemanagment holes

Great Motor Mount with a 1 Degree angle to grab fillament better. I used it for my Tevo Tarantula, but you can use it on any 3D-Printer. Has 3 4mm holes to mount it to somewhere (in my case 2020 Aluminium).

What You'll need:

3* M4 T-Nuts (If you use it with 2020 Aluminium)
3* M4 Screw to mount it (2020)
3-4* M3 Screws to mount the stepper motor (depending on extruder setup)