Thingiverse
Pachinko Ball Lifter
62
Downloads
61
Likes
2
Makes
***NEW DESIGN 4/5/2025***
Printed Parts:
- Print Top, Center, Bottom and Legs in any material with at least 30% infill and 2 wall loops (PETG or ABS Preferred) Support may be needed for bottom plate.
- Print Gear and Gear Top in ABS or PETG with 3 wall loops and 50% or higher infill (Supports needed for gear, interface distance of 0.6 works well).
Bill of materials:
1x 1/8" x 12" Metal Rod (CUT DOWN to 4" Long) Home Depot, Ace) or https://www.amazon.com/dp/B0CY4DWJFQ
4x #8 x 4.5" Wood S
Printed Parts:
- Print Top, Center, Bottom and Legs in any material with at least 30% infill and 2 wall loops (PETG or ABS Preferred) Support may be needed for bottom plate.
- Print Gear and Gear Top in ABS or PETG with 3 wall loops and 50% or higher infill (Supports needed for gear, interface distance of 0.6 works well).
Bill of materials:
1x 1/8" x 12" Metal Rod (CUT DOWN to 4" Long) Home Depot, Ace) or https://www.amazon.com/dp/B0CY4DWJFQ
4x #8 x 4.5" Wood S
Sign in to leave a comment
Sign in