Tiny Whoop Charger

This is a Tiny whoop lipo charger. This charger charges at 130Ma and uses the TP4056 Battery Charger Module.

NOTE: THIS IS FOR SOMEONE WITH ADVANCED SOLDERING SKILLS!!

Requires,
A soldering iron
A hot glue gun
Superglue
5 TP4056 Battery Charger Modules
5 10k Resistors
5 2mm JST PH connectors
And of course the 3D printed case



Step 1: 3D print the case.

Step 2: Un-solder the micro USB connectors from 4 of the 5 TP4056 Battery Charger Modules.

Step 3: Un-solder the "curr