Mini Kossel Cable Tye Points

Needed to keep cables tidy on the mini kossle iv just built and cable tye points are expensive so designed and printed some my self. added benifit you can use an M3x6 button cap screw to mount them any of the 15x15 extrusions wereever you want.

I printed at 0.2 layerheight and 50mm/sec in PLA (in a grid of 9 mounts)
Drill out :
Mount hole with 3mm Drill.
Tye Points with 2.5mm Drill.
Or use a sticky pad to mount were ever you want