Thingiverse
Spinning Clay Target Holder
by mrtinkerer
156
Downloads
96
Likes
0
Makes
Holds 8 clay targets using this thing:
https://www.thingiverse.com/thing:2369862
Attached is the DXF file. Design dimensions are in INCHES. Size the DXF in your program so that the diameter is 14" (not including the "T"). See pictures.
Use a 1/8" router bit for the "T" pocket and for the screw holes.
Use a 1/4" router bit for the rest of the cuts.
Video: https://youtu.be/t3_L0ax7ErU
Requires materials:
15" x 15" x 1/2" wood board or plywood
2 x 608 bearings
1/4" coarse thread scr
https://www.thingiverse.com/thing:2369862
Attached is the DXF file. Design dimensions are in INCHES. Size the DXF in your program so that the diameter is 14" (not including the "T"). See pictures.
Use a 1/8" router bit for the "T" pocket and for the screw holes.
Use a 1/4" router bit for the rest of the cuts.
Video: https://youtu.be/t3_L0ax7ErU
Requires materials:
15" x 15" x 1/2" wood board or plywood
2 x 608 bearings
1/4" coarse thread scr
Sign in to leave a comment
Sign in