DPS600mount for AM8

this is to mount the DPS600 psu to the back of the right Z-tower

you need foillowing:
1 amphenol MUSBA51100 port
4 M5 screws for frame (or 6 if you use 2 holders)
4 nuts for mounting in the frame (or six)
2 screws for amphenol mount

hole is an USB port for an amphenol USB port.
on the backside there is a small gap to the frame, this is used to drag the powercables inside the frame.

keep in mind that i do not use the standard fasteners for the frame. if you do, just saw off the edge