Thingiverse
2020 3030 Painting Turning Thing
by TunnelVision
61
Downloads
38
Likes
0
Makes
What is it?
========
This is a thing for holding and turning 2020 (20x20mm) and 3030 (30x30mm) aluminium extrusions for spray painting. I used a few of these to help paint the frame for a HyperCube Evolution 3D printer.
It works with Motedis 3030 and 2020 Bosch-type (B) extrusions, and the centre hole fits a wire coat hanger with the plastic stripped off.
My painting steps were: rough up with 180 grit sanding pad, clean with tack cloth and solvent, etch primer (2 coats), paint (3 coats)
========
This is a thing for holding and turning 2020 (20x20mm) and 3030 (30x30mm) aluminium extrusions for spray painting. I used a few of these to help paint the frame for a HyperCube Evolution 3D printer.
It works with Motedis 3030 and 2020 Bosch-type (B) extrusions, and the centre hole fits a wire coat hanger with the plastic stripped off.
My painting steps were: rough up with 180 grit sanding pad, clean with tack cloth and solvent, etch primer (2 coats), paint (3 coats)
Sign in to leave a comment
Sign in