Thingiverse
SN08-N/SN04-N Sensor Mount (on 40mm Fan) Flsun Prusa I3 2017
von lembasbrot
169
Downloads
95
Likes
2
Makes
SN08-N / SN04-N sensor mount for central installation infront of a 40mm heatsink fan.
This design features two M3 hex nut inlets so you don't need to fiddle around holding the nut while installing or adjusting the sensor.
The fan's dimensions in this application are 40x40x10mm (32mm screw offset).
**Hardware needed:**
4x M3 Nuts
2x M3x25mm Screws
**Sidenote:**
The offset to the nozzle is 55mm. Please consider adjusting your offset values and auto bed leveling limits accordingly to
This design features two M3 hex nut inlets so you don't need to fiddle around holding the nut while installing or adjusting the sensor.
The fan's dimensions in this application are 40x40x10mm (32mm screw offset).
**Hardware needed:**
4x M3 Nuts
2x M3x25mm Screws
**Sidenote:**
The offset to the nozzle is 55mm. Please consider adjusting your offset values and auto bed leveling limits accordingly to
Melde dich an, um einen Kommentar zu hinterlassen
Anmelden