Tronxy X1 8mm Z-Nut Adapter

My Tronxy Kit from Gearbest doesnt contained the 5mm Brassnut. I couldnt find it anywhere to buy so i designed a plate to fit the standart 8mm nut with an standart M8 rod.

I also made a slight offset for the railaxes to get rid off the wobble that was present with the original mount. Its a strong fit.

If you build it yourself be beware of the different steps / mm on the Z axis. I used Repetierhost to easy change the config in the firmware. You also need an different coupler on the stepper