Raspberry Pi Zero (W) Justboom Amp Zero pHAT Enclosure

For those who don't know the JustBoom Amp Zero pHAT is a Digital to Analogue convertor that sits on top of the Raspberry Pi Zero. This enables the Pi to stream very high quality audio at around 30Watts in a very small package. Simply hook up passive speakers & away you go. Many audiophiles have replaced large expensive DACs & Amps with this tiny set up its genuinely that good.

I looked for a printable enclosure but couldn't seem to find one so designed my own. The JustBoom also accepts a rotary encoder for volume adjustment etc (Of course this can also be done on the device you are streaming from) so have included a knurled knob for this.

Enclosure printed in PLA at 20%, Knob printed in PLA at 80% but I'm sure PETG or ABS would also be fine. Would suggest the RPi is stuck done with double sided tape & the bottom of the encoder insulated in some way as its purposely quite tight in there & we would want anything to short out.

I have no affiliation with JustBoom (Other AMP/DACS