Thingiverse
ToyREP Z-probe
by mwelchuk
16
Downloads
6
Likes
0
Makes
These are the parts I have created to turn a servo and mini micro-switch in to a Z-probe for the [ToyREP](https://www.thingiverse.com/thing:945156).
The servo I have used is a SG90, the microswitch is branded as "KaiChe". Both seem to be widely available on eBay and AliExpress.
The bracket for the servo mounts onto the shroud for the cool end, behind the fan. I found that I could use the original screws in the upper two mount points, but required longer ones for the lower two as I also hav
The servo I have used is a SG90, the microswitch is branded as "KaiChe". Both seem to be widely available on eBay and AliExpress.
The bracket for the servo mounts onto the shroud for the cool end, behind the fan. I found that I could use the original screws in the upper two mount points, but required longer ones for the lower two as I also hav
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in