Parakeet Food Dish

This is small food dish for my parakeet. It hooks to the inside of his cage and has a perch for him to sit on while he eats. I printed it in PLA on my Creality CR-10 using Cura set to the recommended settings for fine (0.2mm). I used 200 degrees Celsius for nozzle and 60 degrees Celsius for bed. It took about 6.5 hours to print and used about 20 grams of filament. I suggest using support as the perch is raised up on the dish. I used a brim for bed adhesion to blue painters tape rubbed with