Thingiverse
1/4" Deep Reach Socket and Ratchet rack
by Roxanna77
33
Downloads
18
Likes
0
Makes
I made this socket and ratchet holder to hang on my toolbox
It fits these sockets and ratchet from Harbor Frieght, and probably others
Need large print area, it is 240mm wide. I printed on my own design Kossel with 260mm build plate in PETg.
I used three 1.21" diameter magnets from Home Depot to hold them on my tool box lid. There are holes in the print that do not go all the way through in case you have other mounting ideas. I drilled through and used M3 screws and added some silicon to the
It fits these sockets and ratchet from Harbor Frieght, and probably others
Need large print area, it is 240mm wide. I printed on my own design Kossel with 260mm build plate in PETg.
I used three 1.21" diameter magnets from Home Depot to hold them on my tool box lid. There are holes in the print that do not go all the way through in case you have other mounting ideas. I drilled through and used M3 screws and added some silicon to the
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in