TronXY P802MA Warped Carriage Levelling Washers M3

You can fix warped x axis carriages for the lead screw attachment by printing 3mm washers with outside diameter of 4mm, inside 3mm and 0.2mm high.

I printed like 100 for less than a metre of PLA. Took a whole minute to print lol. Then I just packed the washers between the screws holding the lead screw guide/nut to the carriages.

You know when you have it right when the rod falls through the nut under gravity or a very small tap and if it is parallel to the guide rail. This adjustment p