Transfer Case for 3d printed drivetrain of Ossum Jeep

Transfer Case for my completely 3d printed Ossum Jeep.

You will need to print the following parts twice:
25ToothGearv3.stl
DriveShaftv5_print2.stl

Required hardware:

6x 6700ZZ or equivalent bearing(15x10x4mm)
4x M3-6mm bolts
2x M3-10mm bolts
8x M3-6mm set screws

You will also need to print the following pieces from mrcrankyface's [3D printed truck V3: Center differential](https://www.thingiverse.com/thing:1680949):
Axle_center_Ujoint_x3.stl - two of these
Axle_center_shaft_spider_x2.stl - two of these

These files have also been provided here.